Read Write Head Change tools are the mandatory tools to replace read write heads of damaged hard drives that are unable to detect any data.

To keep the heads from crashing into the platter is just as important to keep them from crashing into each other although they shouldn’t be allowed to touch the platters. This read write head replacement tool that when used in a data recovery process will prevent the read / write heads from making any contact with each other, and /or crashing to the platters of the hard drive. The tool is made up of derlin plastic and finds is use in almost all the process of data recovery.

The heads on each type of drive sit at different heights to fly over the different heights of the platters. The platters vary in height due to the spacers (metallic/plastic) that are used to keep them apart. Read write head tool is fully adjustable for one or more (up to 4) heads at different heights. One tool fits all. This can do multi platter, single platter and dual or two platter hard drives head stack swaps.

The head replacement technology is used where hard drives have been burned and the read write heads are almost burned out completely, flooded drives where the heads have suffered water or corrosive damage. Some hard drives suffer head damage due to the heads knocking against the limiters or if the hard drive has been dropped. The Read Write head tool is a standard tool in order to recover data from above written hard drives.

The read write head tool itself is very simple to use and causes no damage to the heads or the platters surface. The tools are available for both desktop and laptop hard drives. To work on both, the products namely read write head replacement tool for desktop and read write head replacement tool for laptop are required. Once they are adjusted to the appropriate heights using the platters as a guide, the heads need to be slided onto the wedges to remove the heads without damage. It is important with any of read write head change tools that they are not inserted between the heads as this would damage the sensors. The tool should be only inserted between the sliders.

On taking a close look at a read / write head it can be seen that there are copper coils belonging to the transducer, and tiny electric wires attached to gold pads.

The read write head tool is used to keep the heads from crashing during alignment. If large quantities of these hard drives are available, read write head tools, the plastic wedges in donor drives can be left prior to using these parts if one wanted to prepare ahead.

The tools are available in a very low cost starting from 25 USD.There are total twelve read write head tools available. A separate tool for hard drives with one, two, three or four platters can be purchased. A complete economical kit consisting of all twelve tools is also available. This complete kit is mandatory for those who are into the data recovery process continuously in one or the other hard drives.

The tool keeps the heads apart so that one can align the read write heads and make repairs to the hard drive heads. It will work for any hard drive - Seagate, Hitachi, Fujitsu, IBM, Maxtor, Conner, Western Digital, Samsung. Read write head tool allows you to perform your data recovery quickly and safely, saving you time and money.

If several of our tools are purchased, you will have enough components to remove as many heads as you want. A single tool will handle 1-6 heads. Two tools can be combined to remove 12 heads not that we see many drives like that in this day and age.